DAT-heads Digest #388
Contents:
re: how to show hours on R500 (Dan Gale)
RE: how to show hours on R500 ("Paul K.")
Re: how to show hours on R500 (Seth)
From: Dan Gale <dgale@loslobos.org>
Subject: re: how to show hours on R500
Reply-To: dgale@loslobos.org
Date: Tue, 11 Nov 2008 20:38:52 -0800 (PST)
No need to drill the remote - just press the menu button (it will light up) and you should see "SET ID 6 00" dislayed - then turn the shuttle wheel to the left and it should display "HOUR XXXX" with the total number of hours displayed.
--- On Tue, 11/11/08, Digestifier <DAT-heads-Request@datheads.phish.net> wrote:
>
> From: "ryson2" <ryson2@sbcglobal.net>
> Subject: how to show hours on R500
> Date: Tue, 11 Nov 2008 21:31:30 -0600
>
> What the procedure for showing the hours of use on an R500?
> I remember
> having one once and I drilled the remote, but I have
> forgotten how to do so.
>
> -Ryan
>
From: "Paul K." <rockcat@verizon.net>
Subject: RE: how to show hours on R500
Date: Wed, 12 Nov 2008 13:30:34 -0500
You drilled the remote?!!! WTF?!
Just push the menu button (located just to the left of the jog/shuttle dial)
and then step the dial left or right (I believe it's 2 clicks left) until it
displays "HOUR". Just to the right of "HOUR" in the display will be the
number of hours logged on the tape heads.
============================================================================
From: "ryson2" <ryson2@sbcglobal.net>
Subject: how to show hours on R500
Date: Tue, 11 Nov 2008 21:31:30 -0600
What the procedure for showing the hours of use on an R500? I remember
having one once and I drilled the remote, but I have forgotten how to do so.
-Ryan
From: Seth <sethb@panix.com>
Subject: Re: how to show hours on R500
Date: Wed, 12 Nov 2008 14:24:10 -0500 (EST)
> You drilled the remote?!!! WTF?!
That's for the R300.
Seth
** FOR YOUR REFERENCE **
To unsubscribe from this digest, please send email to
dat-heads-unsubscribe@datheads.phish.net
If your email address has changed, you may (optionally)
send the message to
dat-heads-unsubscribe-oldaddress=olddomain@datheads.phish.net
and the old address will be removed.
Problems or questions about a subscription should be addressed
via these avenues and then if needed to
dat-heads-owner@datheads.phish.net
or
postmaster@datheads.phish.net
never the list itself
You can submit a message for inclusion in the next digest via this address:
Internet: dat-heads@datheads.phish.net
Archives of DAT-Heads digests and related files are available on
the DAT-Heads home page:
http://www.solorb.com/dat-heads/
End of DAT-Heads Digest
******************************